NEW! Accu-Level |
Level
Indicator
Factory calibrated, thegeneral purpose
indicator reads 0-100% of volume in
gallons. A single push button allows
users to scroll through their active
channels. |
Pick-up
Unit
The general purpose twowire transmitter
provides non-contact level measurement
up to 32' and is ideally suited for
challenging corrosive, coating or waste
liquids. |
Can
read a 2-compartment
tank with an additional
Pick-up Unit. Easy to install on existing
vacuum tank or
install on a new tank. |
|
12” Primary Shutoffs
|
The 12” Primary Shutoff comes with standard neck lengths of 6”, 12”, or 15”. The weldable base is 12.25” OD. This unit features heavy duty wing nuts, 6” stainless steel float ball, an easy access design, and a clamp-on ball seat. Elbows and hose shanks are extra.
|
|
Low Profile 12” Primary Shutoff
|
The Low Profile 12" Primary Shutoff minimizes the overall height of the vacuum tank because the low profile design is more compact (only 7.25" tall). This saves you 5" off the standard height on our regular primary shutoff. Features easy access for cleanout and is equipped with 3 heavy duty zinc plated wingnuts and eyebolts. Positive shutoff with a 6" stainless steel float ball and clamp on ball seat. Standard neck length of 6". The weldable base is 12.25" OD.
|
|
21” Primary Shutoff
|
Our 21” Primary Shutoffs come with standard neck lengths of 6 or 12”. They feature an easy access design, zinc plated heavy duty wing nuts, a 6” stainless steel float ball, and a clamp-on ball seat. Elbows and hose shanks are extra.
|
|
20” Aluminum Primary Shutoff
|
The 20” Aluminum Primary Shutoff comes with a standard next length of 6”. The neck is available in aluminum or 304 stainless steel. The weldable base is 20.50” OD. This unit features 6 quick opening cam levers that provide a positive seal, a 6” stainless steel float ball, and a clamp on ball-seat. Standard 3” NPT threads are installed on the primary to simplify installation. Elbows and hose shanks extra.
|
|
2/4/5 Gallon Secondary Shutoffs
|
The 2, 4, and 5 gallon secondary shutoffs are more compact, lighter weight, and can be used for portable toilets, septic tanks, grease traps, commercial holding basins, car wash pits, and tank trailers. The Secondary Shutoff is efficiently designed to help eliminate excessive pump wear and damage in the event any material escapes past the primary shutoff. It is equipped with a rubber shutoff seat, 4” stainless steel float ball, 1” drain valve, and 1/4” fitting for a vacuum/pressure gauge. The 4 and 5 gallon models are equipped with a 2” sight eye. Elbows, hose shanks, and nipples are extra and available in 1”, 1.5”, 2” and 3” sizes.
|
|
22/39 Gallon Secondary Shutoffs
|
The NEW 22 Gallon and 39 Gallon Secondary Shutoffs include these features.
- Easy access design
- Zinc plates heavy duty wing nuts and eyebolts
- 6” stainless steel float ball on the 22 gallon secondary
- 8” stainless steel float ball on the 39 gallon secondary
- Clamp on ball seat for positive shutoff
- 2” drain valve
- 5” sight eye to view the liquid level in the secondary
- The 22 gallon secondary is capable of handling 950 cfm and has 4” openings
- The 39 gallon secondary is capable of handling 1400 cfm and has 6” openings
|
|
2” Plastic Secondary Shutoffs
|
This secondary shutoff is made of heavy duty nylon plastic that has a maximum working pressure of 70 PSI. The lower half is made of clear mackrolon material with a 3/4” ball valve drain. Equipped now with 3” size fittings instead of metric sizes. Available 2” or 3” Plastic Secondary Shutoffs.
|
|
Final Filters
|
The final filter is a wire mesh type filter designed to stop small particle from entering the pump. Equipped with brass wire mesh that can stop particles down the .02”, resulting in longer vane and pump life. The final filter comes standard with threaded nipples.
|
|
Secondary Moisture Trap
|
This Secondary Shutoff is available in either 10 or 12 gallon sizes. It features an easy access design, zinc plated heavy duty wing nuts, 6” stainless steel float ball, clamp-on ball seat, and 1” drain valve. Elbows and hose shanks are extra and available in 2”, 3”, and 4” sizes.
|
|
14 Gallon Horizontal Secondaries
|
The 14 Gallon Horizontal Secondary Shutoff includes these features.
- Capable of handling 700 cfm
- Horizontal design is more compact
- Can be conveniently mounted on the side of your truck frame under or above the catwalks
- Easy clean-out access via 4 heavy duty zinc plated wing nuts and eyebolts
- 5” sight eye to view the liquid level in the secondary
- Easily accessible clamp on ball seat for positive shutoff
- 6” long-lasting stainless steel float ball
- 5” sight eye to view the liquid level in the secondary
- Equipped with final filter that stops small particles from entering pump; resulting in longer vane and vacuum pump life.
|
|
Silencer-Oil Separator
|
The Silencer/Oil Separator is uniquely designed to silence the vacuum pump and catch the used pump oil. The muffler is equipped with 4” size openings and a 1” drain valve.
|
|
Vertical Oil Catch Mufflers
|
The upright oil catch muffler is a unique Moro designed system that has been tested and proven. This cleanable stainless steel internal screen catches the vacuum pump oil and helps to quiet the vacuum pump noise. The muffler is equipped with a 1” drain valve.
|
|
Horizontal Oil Catch Mufflers
|
The horizontal oil catch muffler is a unique Moro designed system that has been tested and proven. The air intake system catches the vacuum pump oil and helps to quiet the vacuum pump noise. The muffler is equipped with a 1” drain valve. The muffler comes with 2” and 3” OD size tubing.
|
|
17, 20, 25” Manways-Gasket in Lid
|
Manways are available in 17, 20, 21, 25, or 36” diameter with standard neck lengths at 6 or 12” the weldable base is made of 1/4” steel. These units feature zinc plated heavy duty wing nuts, 5/8” zinc plated eyebolts, zinc plated clevis pins, zinc plated rool pins, 3/16” steel construction and NEW one piece design brackets for superior performance.
|
|
5” Sighteyes
|
The 5” sight eye incorporates a high tinsel strength glass lens for quick fluid level reference. Any number may be welded on he tank in any position. The lens is removable for rapid cleaning and encased in a mild steel weldment body. The body is available in either steel or aluminum and is equipped with a removable lens for easy cleaning.
|
|
3” Sighteyes
|
Heavy duty construction with plastic lens, rubber O ring, and heavy duty steel weldable base. Available in 2” or 3” sight eyes.
|
|
Aluminum Couplings and Brass Valves
|
Septic Service Inc. carries a complete assortment of brass valves and aluminum couplings to meet your needs. We offer competitive prices and dependable service. Our selection includes an assortment of aluminum hose couplings, coupling gaskets, hose clamps, hose menders combination nipples, hose strainers and brass valves.
|
